Installation instructions for the water filter

For a video tutorial, you can watch this detailed installation guide on our YouTube channel by clicking this link .

Preparing the installation area:

• Make sure you have enough space under the sink or in the area where you plan to install the filter.
• Turn off the water supply and drain any remaining water in the pipes to prevent leaks.

Filter mounting:

• Place the filter holder in the desired location, making sure it is within reach of water pipes and a faucet if necessary.
• Mark the points where the screws will be installed and fix the filter holder to the wall or the inside of the cabinet.

Connecting the hoses:

• Connect the filter inlet hose to the cold water inlet. Make sure the connections are tight.
• Then, connect the filter outlet hose to the faucet or water system you want to use.

Faucet Adjustment (if equipped):

• If your filter includes a dedicated faucet, drill a hole in your sink or use an existing one to install it.
• Connect the filter hose to the faucet following the model-specific instructions.

Verification and testing:

• Once installed, turn on the water supply and check for leaks at all connections.
• Let the water run for a few minutes to purge the filter and ensure it is working properly.

Maintenance:

• Change the filter cartridge regularly according to the manufacturer's recommendations to ensure the best water quality.